10mm polymer composite diaphragm | Dual-cavity design 0.033mm Japanese CCAW voice coil | External N52 high performance magnet | High-purity oxygen-free copper cable

In-line controls with mic included | Independent DSP chip Supports 384kHz/24bit lossless audio decoding | Compatible across various platforms | 3.7g light weight | 6 built-in tuning presets  |  Transparent black/Transparent  |  Hi-Res Audio certified

*Note: The JD10 TC adopts a non-detachable cable design due to cost limit. Please be considerate before purchasing.

 

* Pictures are for reference only. The actual product may vary.

Dynamic In-Ear Monitors 

넳 넲
넳 넲

Sound quality bar, the standard for value 10mm polymer composite diaphragm

Since its release, the JD1 has been a refreshing entry into the world of affordable HiFi headphones, offering audiophile-grade sound quality at an affordable price for users worldwide.

 

The second-generation affordable headphone FIIO JD10 continues the “dual high” approach - high sound quality at a high-value affordable price - in a quest to be the standard for value among entry-level headphones.

 

To be the benchmark for entry-level sound quality, the JD10 features a carefully selected 10mm polymer composite diaphragm. This diaphragm is high in rigidity, low in distortion and is optimally damped. It delivers rich and full bass, which perfectly blends with the midrange and treble for a truly enjoyable sound. Additionally, thanks to meticulous acoustic tuning that leverages the diaphragm’s rigidity, the JD10 is highly resolving in a manner rarely seen amongst its peers, capable of reproducing even subtle audio details.

넳 넲

Built-in decoding

Convenient HiFi  

Independent DSP chip

The JD10 TC features a built-in high-performance independent DSP chip*, allowing you to easily and conveniently listen to high-resolution audio without any other equipment.

Supports 384kHz/24bit lossless audio decoding

The JD10 TC supports 384kHz/24bit decoding, amongst the best in its class. You can truly listen to high-resolution audio even on this entry-level device.

Compatible with all platforms and devices

The JD1 TC fully supports Win/MacOS/iOS/Android with no need for drivers – simply plug and play.

*Unlike the typical integrated audio SoCs on phones and computers, the JD10 TC can route digital audio signals directly to an independent DSP chip through the USB Type-C connector, achieving higher quality sound.

넳 넲

For HiFi or for gaming, all ready to go 6 built-in tuning presets 

 

Acoustic engineer Tweed created sound presets for the JD10 TC for actual user needs. In addition to the 5 built-in HiFi sound presets, a new “Gaming” sound preset was specifically created for the JD10 TC. When using the “Gaming” sound preset, the JD10 TC will provide you with more accurate sound positioning, letting you more easily determine where footsteps and gunfire are coming from and when skills are activated – giving you the edge you need to become the MVP of every match.

 

Default: Original sound, widely fits various music styles

Bass extension: For pop, ACG and hip-hop music styles 

Vocal: For vocals and Acappella music styles

Gaming: Special tuning style, focuses on gaming experiences, accurately capturing the battlefield information

넳 넲

Light as a feather 3.7g light weight

The JD10 was designed from the very beginning to be a comfortable and light versatile pair of IEMs. Each JD10 ear piece weighs only 3.7g, among the lightest in its class and making it easy to go for long fatigue-free listening sessions. 

넳 넲

With just one button, connect with the world In-line controls with mic included

Included is a cable with three-button in-line controls and high-definition microphone. The up and down buttons can be used to increase or decrease the volume, while the middle button can be used to answer/hang up as well as play/pause.

넳 넲

High-purity oxygen-free copper wire base

The total of XX high-purity oxygen-free copper wires is fully capable of transmitting rich audio signals without fail, letting you be more easily immersed into the world of high-fidelity sound.

Audiophile-grade cable, direct path to HiFi High-purity oxygen-free copper cable

0.78mm 2-pin detachable cable

The detachable 0.78mm 2-pin headphone cable provides you with a way to further upgrade your headphones in the future.

High-purity oxygen-free copper wire base

0.78mm 2-pin detachable cable

*JD10 TC version does not support 2pin 0.78mm interchangeable cable design.

넳 넲

Two colors, standing out even further Transparent black/Transparent

넳 넲

Hi-Res Audio certified

The FIIO JD10/JD10 TC has been certified by the Japan Audio Society (JAS) and Consumer Electronics Association (CEA) to be Hi-Res Audio capable, a testament to its ability to faithfully reproduce the music as the artist intended.

넳 넲

Wearing method: Around-the-ear IEM

Driver: 10mm polymer composite dynamic driver

Frequency response: 20Hz-40kHz

Impedance: 32Ω@1kHz

Sensitivity: 105dB/mW@1kHz

Cable: High-purity oxygen-free copper

Cable length: About 1.2m

Unit weight: About 3.7g (excluding cable)

Headphone connector: 0.78mm 2-pin detachable  

Colors: Transparent black/Transparent  

JD10 Basic specifications

넳 넲

JD10 Abundant accessories

① ------------------------------------------------------  Packaging box*1

②-------------------------------------------------------- Warranty card *1

③-----  0.78mm 2-pin oxygen-free copper headphone cable*1  

  ④ ---------------------  Ear tips*3 pairs (S/M/L) (M pre-installed)

넳 넲

Switch between sound presets to better match your preferences by pressing the “+” and “-“ buttons on the in-line controls at the same time.

How to switch between sound presets? 

Frequency Response Characteristics of Preset EQ

1. Upon initial connection and power-up, the EQ is the Default one.

2. Upon subsequent connections and power-ups, the EQ follows ttheone that the device last shutdown.

넳 넲

Thrilling bass, exhilarating experience Dual cavity design

The JD10 employs a dual-cavity acoustic design, with separate damping control systems in each cavity. This precise control of air flow damping helps reduce distortion, which effectively enhances driver diaphragm movement and bass extension. When listening to complex music, this design allows the JD10 to capture more nuances in bass notes – resulting in a refreshingly speedy and detailed bass.

넳 넲

Lighter, stronger

0.033mm Japanese CCAW voice coil

To deliver higher quality sound from the driver, the JD10 utilies a special ultra-fine Japanese CCAW voice coil, with a wire diameter of only about 0.033mm. This voice coil, thanks to the wires’ thinness and properties of CCAW, significantly reduces the overall driver mass. As a result, it is easier to get the driver to produce higher volumes and also leads to improved transient response. The result is cleaner and more enjoyable sound.

넳 넲

A sound quality tour de force, thanks to robust power External N52 high performance magnet

The JD10 employs an external magnet design. This allows for a larger magnet, which more effectively envelops the voice coil and results in more powerful sound. N52 high-performance neodymium iron boron magnets were chosen due to their abundance of energy and the ability to be made to apply their force over a uniformly broad area - ensuring the driver performs at its best.

넳 넲

Treble: For classical, piano, and orchestral music styles

Harman Reference: Tailored to international universal music styles