7. How to use the Bluetooth receiving function of K7 BT?
K7 BT input setting: After K7 BT is turned on, short press [INPUT] to switch to BT mode
In the phone settings - Bluetooth, find the new device [FiiO K7] and connect it
K7 BT output setting: switch to the corresponding output port according to the interface used, switch the headphone or speaker output on the front panel to PO, and switch the line output on the rear panel to PRE or LO to decode the audio signal of the mobile phone
Note:
-
The RGB indicator of the K7 BT can not indicate the Bluetooth encoding format, nor can the APP display the current encoding format. You could check which Bluetooth encoding format is used on the transmitter.
-
K7 BT can be connected to 2 Bluetooth devices at the same time. When switching input device, you need to pause one of the connected devices, then play on the other device instead of switching via the K7 BT.
【How to connect to 2 Bluetooth devices at the same time】
-
After the K7 BT is connected to the Bluetooth of device 1, turn off the Bluetooth of device 1, search for K7 BT on the Bluetooth setting interface of device 2 and connect.
-
Turn on Bluetooth in device 1 again. On the Bluetooth setting interface of device 1, click the paired K7 BT to reconnect. You could also restart the K7 BT after a successful pairing with device 2, so the BTR7 can be connected to two Bluetooth devices simultaneously.
【How to switch input device】
When switching input device, you need to pause one of the connected devices, then play on the other device instead of switching via the K7 BT.
