13. How to use the local playback mode in K17?

1.Connect a USB flash drive to the [USB A] port on the rear panel of the K17. Rotate the menu knob and switch to [LOCAL PLAY] mode.

2.Slide left on the screen, you can enter the mode switching page. Click [Browse Files] to find the corresponding track you want to play.

3. Slide right the screen, you can enter the menu settings page. Click [Play settings] to set the playback mode and resume mode.

4.K17 output setting: switch to the corresponding output port according to the interface used, switch to [PO] or[PO+PRE]for the front panel, switch to[PO+PRE], [PRE] or [LO] for the rear panel. The optical and coaxial output ports also have output at that time.

Note:

1.There is no limitation to the capacity of the hard disk theoretically. According to engineer’s test, maximum support up to 12T. The USB A port output current is 500mA, so it is recommended to connect the hard disk to external power supply. And please back up the files before use, so as not to damage the contents of the hard disk.

2.K17 has a built-in demo track. If you cancel the favorite (extinguish the little red heart), you can delete this song. If you need to retrieve it you can restore the factory settings.

For more local playback features, please wait for the subsequent firmware upgrade.