| Model Name |
Q5 |
Q1 Mark II |
| General Specifications |
| Color Available |
Titanium |
Black |
| Dimensions |
About 124 mm× 64 mm× 16 mm |
About 99mm x 59mm x 12.5 mm |
| Weight |
About 195g |
About 101g |
| Displayer |
N/A |
N/A |
| Analog Audio Input |
Standard 3.5 mm Jack |
Standard 3.5 mm Jack |
| USB Port |
11-pin Micro USB at the bottom side, for data exchanging and charging |
Micro USB |
| 5-pin Micro USB on the left side, for charging only by default |
| （Can be interchanged via App） |
| Digital Audio Input |
Coaxial/Optical input |
N/A |
| Headphone Output |
Standard 3.5 mm Jack |
Standard 2.5 mm Jack |
| Line Output |
Standard 3.5 mm Jack |
Standard 2.5 mm Jack |
| Balance Headphone Output |
Standard 2.5 mm Jack |
Supported (2.5mm balanced headphone jack) |
| Headphone Impedance Range |
16~150 Ω (AM3A, PO) |
16~100Ω(PO) |
| 16~300 Ω (AM3A, BAL) |
16~150Ω(BAL) |
| Volume Control |
ADC volume adjustment |
TOCOS Potentiometer |
| Bass Adjust |
Yes |
Yes |
| Treble Adjust |
N/A |
N/A |
| Balance Adjust |
0.1 dB |
0.2 dB |
| GAIN Control |
Yes(High/Low) |
Yes(High/Low) |
| MFi |
Yes |
Yes |
| Bluetooth |
Bluetooth 4.2, supports aptX, AAC, SBC |
N/A |
| Operation |
Volume knob + Physical buttons + Toggle switch |
Volume knob + Toggle switch |
| Chip Used |
DAC: AK4490EN * 2 , USB: XMOS, Bluetooth： CSR8670 , LPF：OPA1642×2， |
USB: XMOS , DAC: AKM4452 ,LPF: OPA1662, AMP: OPA2323+OPA926 |
| Volume IC：NJW1195 OP+AMP：AD8620+OPA926 |
| Extended functions |
| APP interconnection |
Supports setting through App |
N/A |
| Supports connection to Sony Walkman players |
Yes |
Yes |
| Supports docking to K5 |
Audio input |
N/A |
| Deep-sleep |
Automatic stand-by, can be controlled on App |
N/A |
| Firmware upgrade |
System firmware and Bluetooth version can be upgraded through USB |
N/A |
| Audio Performance (DAC Section) |
| DSD Support（USB IN） |
DSD64/128/256 |
DSD64/128/256 |
| USB Sample Rate Support |
384kHz/32bit |
Up to 384kHz/32bit |
| SPDIF Coaxial Sample Rate Support |
192kHz/24bit |
N/A |
| SPDIF Optical Sample Rate Support |
96KHz/24bit |
N/A |
| Frequency Response |
5 Hz~90 kHz（-3dB） |
6 Hz~80 kHz（-3dB） |
| THD+N |
＜0.001% (1 kHz/10kΩ) |
＜0.003%(1 kHz/10kΩ) |
| SNR |
≥115 dB (A-weighted) |
≥110 dB(A-weighted) |
| Headphone out specifications (3.5mm headphone out jack) |
| Output Power1 |
≥230 mW（16Ω / THD+N＜1%) |
≥112 mW（16Ω / THD+N＜1%, AUX IN) |
| Output Power2 |
≥160 mW（32Ω /THD+N＜1%) |
≥75 mW（32Ω /THD+N＜1%, AUX IN) |
| Output Power3 |
≥24 mW（32Ω /THD+N＜1%) |
≥11 mW（32Ω /THD+N＜1%) |
| Frequency Response |
5 Hz~50 kHz（-3dB） |
6 Hz~80kHz (-3dB) |
| SNR |
≥115 dB (A-weighted) |
≥115 dB (A-weighted, AUX IN) |
| Output impedance |
＜1.4Ω (32Ω loaded) |
＜1.2Ω |
| Crosstalk |
≥73 dB (1 kHz，AUX IN) |
≥79 dB (1 kHz，AUX IN) |
| THD+N |
＜0.001% (1 kHz） |
＜0.002% (1 kHz, AUX IN) |
| Peak Output Voltage |
＞6 Vp-p |
＞4.4 Vp-p |
| MAX. output Current |
150mA (For reference) |
150mA (For reference) |
| MAX. input Level |
3.8 Vrms |
3.4 Vrms |
| Power and Battery |
| Power/Charger |
DC5V 2A (Recommended) |
DC5V 2A（recommended ） |
| Charging Indicator |
Red light flashes when being charged, |
Yes |
| Red light goes off after fully charged |
| Low Battery Warning |
Red light flashes twice every 3 seconds |
N/A |
| Battery Capacity |
3800 mAh |
1800 mAh |
| Charge Time |
≤3.5 h （DV5V 2A，USB on the left side） |
≤4 h |
| Battery Life |
＞25 h (AUX IN) |
＞20h（AUX IN） |
| ＞10 h (USB IN) |
＞10h （USB IN） |
| ＞10 h (OPT IN) |
|
| ＞10 h (COAX IN) |
|
| ＞10 h (Bluetooth IN) |
|
