General Specifications |
Name/Model |
RR11 |
Hardware solution |
SoC: MS430, FM radio: SI4831, analog sound effect and amp: FIIO DDB AS100 custom chip |
Color |
Titanium gold/Black/Red/Silver |
Dimensions |
About 83.2x39.4x13mm |
Frequency Modulation (FM) |
FM1: 87~108MHz |
Weight |
About 46g |
FM2: 76~90MHz |
Volume control |
Volume knob |
FM3: 64~87MHz |
Adaptive impedance |
8~100Ω |
Status indicator |
Stereo indicator, frequency pointer, radio indicator, battery level indicator |
Antenna |
Earphones JF1 work as an antenna |
Buttons and Ports |
Slide switch |
FM slide switch*1, Mode slide switch*1, Sound effect slide switch*1 |
USB port |
Type-C USB (charging port, analog input) |
Headphone output |
Standard 3.5mm port |
Knob |
Power on/off/Volume knob, FM knob |
Power Supply Parameters |
Power supply |
DC 5V/≥1A |
Charging time |
About 2h |
Battery Life and Test Conditions |
FM mode 3.5mm headphone out: ≥8.5h |
Audio input |
FM |
Load |
32Ω |
Volume level |
40mV out |
Play track and format |
MP3 44.1kHz/16bit |
AMP mode 3.5mmheadphone out: ≥17.5h |
Audio input |
AMP |
Load |
32Ω |
Volume level |
40mV out |
Play track and format |
MP3 44.1kHz/16bit |
Basic Parameters |
Performance and parameters of FM mode |
Output amplitude |
L+R≥4mV+4mV |
THD+N |
<0.3% |
Noise-limited sensitivity |
≤15dBuV (S/N=30dB ) |
SNR |
≥45dB (A-weighted) |
Performance and parameters of AMP mode (3.5mm out) |
Output power |
L+R≥30mW+30mW (16Ω, THD+N<1%) |
Output impedance |
<1Ω |
L+R≥40mW+40mW (32Ω, THD+N<1%) |
Crosstalk |
≥65dB |
L+R≥5mW +5mW (300Ω, THD+N<1%) |
Output amplitude |
1.1Vrms |
THD+N |
<0.04% (1kHz/-24dB@32Ω) |
SNR |
≥100dB (A-weighted) |
Frequency response |
20Hz~95kHz: attenuation<3dB |
Noise floor |
<10uV (A-weighted) |
20Hz~20kHz: attenuation<0.1dB |
Peak output voltage |
3Vpp |
Input sensitivity |
0.9V |
|
|