| General Specifications |
| Name/Model |
BTR13 |
Hardware solution |
DAC: CS43131*2, USB/Bluetooth decoding: QCC5125 |
| Color |
Black/Blue |
Volume control |
Physical button |
| Weight |
About 28.6g |
Dimensions |
About 63.2x30x18.8mm |
| Driver-free mode (switch mode) |
Supported |
Phone decoding (USB dongle) |
Supported (switch the Mode Switch to PHONE) |
| Microphone |
Supports Bluetooth voice call, built-in omnidirectional microphone |
In-vehicle mode |
Auto on/off following the USB of the vehicle |
| Gain |
L/H |
Channel balance |
＜0.2dB |
| Deep standby |
Auto-enters power saving mode if no connection in 3 minutes, and the time can be set in the app. |
FiiO Control |
Supports settings in the app |
| Bluetooth codec indication |
Blue: SBC; Cyan: AAC; Purple: aptX/aptX LL; Yellow: aptX HD; White: LDAC; Green: aptX adaptive |
Status indication |
The display indicates transmission codec, charging status, battery level, volume, sampling rate, EQ, and menu |
| Display |
0.96-inch TFT (80*160) bezel-less display |
Bluetooth reception (5.1) |
AAC/SBC/aptX/aptX LL/aptX Adaptive/aptX HD/LDAC |
| Recommended impedance |
PO: 8~150Ω |
Firmware upgrade |
OTA upgrade, through FiiO Control |
| BAL: 8~350Ω |
Max supported sampling rate |
PCM: up to 96kHz/16bit |
| Buttons and Ports |
| Physical button |
Power button*1; Multifunction button*1; Volume up/down button*1 |
USB |
TYPE-C USB (Charging/Data transmission) |
| Headphone output |
Standard 3.5mm plug |
Balanced headphone output |
Standard 4.4mm plug |
| Trigger switch |
Mode switch*1 |
|
|
| Power Supply Parameters |
| Power supply |
DC 5V /1A |
Battery capacity |
460mAh lithium polymer battery |
| Charging time |
≤2 hours |
|
|
| Battery Life and Test Conditions |
| 3.5mm headphone out: ≥8 hours |
| Audio input |
Bluetooth reception |
Bluetooth codec |
AAC |
| Volume |
22 levels |
Gain |
High |
| Display status |
Off |
Play track and format |
MP3 44.1kHz/16bit |
| EQ |
Off |
Load |
32Ω |
| 4.4mm BAL headphone out: ≥8 hours |
| Audio input |
Bluetooth reception |
Bluetooth codec |
AAC |
| Volume |
21 levels |
Gain |
High |
| Display status |
Off |
Play track and format |
MP3 44.1kHz/16bit |
| EQ |
Off |
Load |
32Ω |
| 3.5mm headphone out: ≥10 hours |
| Audio input |
USB dongle mode (switch the Mode Switch to PHONE) |
Gain |
High |
| Volume |
22 levels |
Play track and format |
44.1kHz/16bit |
| Display status |
Off |
Load |
32Ω |
| EQ |
Off |
|
|
| 4.4mm BAL headphone out: ≥10 hours |
| Audio input |
USB dongle mode (switch the Mode Switch to PHONE) |
Gain |
High |
| Volume |
21 levels |
Play track and format |
44.1kHz/16bit |
| Display status |
Off |
Load |
32Ω |
| EQ |
Off |
|
|
| Audio Parameters |
| Parts of performance and parameters of headphone output (3.5mm, UAC decoding) |
| Output power |
L+R≥120mW+120mW (16Ω, THD+N＜1%) |
Output impedance |
＜0.6Ω |
| L+R≥100mW+100mW (32Ω, THD+N＜1%) |
Crosstalk |
≥75dB |
| L+R≥10mW +10mW (300Ω, THD+N＜1%) |
Output amplitude |
1.75Vrms |
| THD+N |
＜0.0018% (1kHz/-4dB@32Ω) |
SNR |
≥125dB (A-weighted) |
| Frequency response |
20Hz~40kHz: damping＜3dB |
Noise floor |
＜1uV (A-weighted) |
| 20Hz~20klHz: damping＜0.1dB |
| Parts of performance and parameters of BAL headphone output (4.4mm, UAC decoding) |
| Output power |
L+R≥130mW+130mW (16Ω, THD+N＜1%) |
Output impedance |
＜1Ω |
| L+R≥220mW+220mW (32Ω, THD+N＜1%) |
Crosstalk |
≥124dB |
| L+R≥55mW+55mW (300Ω, THD+N＜1%) |
Output amplitude |
2.7Vrms |
| THD+N |
＜0.0018% (1kHz/-6dB@32Ω) |
SNR |
≥128dB (A-weighted) |
| Frequency response |
20Hz~40kHz: damping＜3dB |
Noise floor |
＜1uV (A-weighted) |
| 20Hz~20kHz: damping＜0.1dB |
